Solutions For DIRECTV Remote Not Working

INTRODUCTION:

If you are a DIRECTV user and are facing problems like the DIRECTV tv remote not working or DIRECTV remote volume not working, or the DIRECTV genie remote not working, and you are not able to find any kind of solution to make it right, then this is the article you need to read. The problems with DIRECTV remote occur often, and it happens to everyone. It can be that it got dropped many times, or maybe you're using an old remote with a new box. Whatever the reason can be, you need to find the solution. Or else it would be difficult for you to watch or stream content on your tv.

DIRECTV is a famous brand for providing streaming services in the form of receivers, or we can say set-up boxes for televisions. But with all the streaming services as electronic devices, technical problems ought to occur. However, it's the way of electric devices. So, sometimes they need a bit of repairing or rebooting, and they are good to go. But, if you want the remotes to work again, you need to follow some particular steps and instructions, and all those steps and instructions are here for you in this article.

WHAT IS DIRECTV:

DIRECTV an American multichannel video programming distributor. Its prime service is to provide digital satellite services, and it also offers traditional linear television services. In the year 2015, AT&T acquired DIRECTV. After that, AT&T announced different plans for several DIRECTV branded over-the-top services with a contract-free over-the-top internet television service, DIRECTV Mobile, which is a service that will offer "premium video and digital content" for phones, and DIRECTV Preview also an ad-supported service that features content from Audience Network, Otter Media, and other partners.

DIRECTV offers high-definition television(HDTV) services to its customers with bandwidth-intensive HDTV broadcasting. It also provides local channels on the television. But, it does not provide local digital channels. It also became the first television provider to provide 4k ultra-high-definition content to the users.

Before we know about the solutions to fix the DIRECTV remote, let's know about the types of DIRECTV remotes.

TYPES OF DIRECTV REMOTES

There are mainly two types of DIRECTV remotes that exist.

• The Universal Remote
• The Genie Remote

The Universal remote can control your whole entertainment system—TVs, DVD players, VCRs and stereo systems. The Universal remote has the capacity to control up to four devices, which include TVs, sound systems, game consoles or DVD players.

The DIRECTV remote has power on your TV, and it controls the volume while watching DIRECTV. However, if you want to adjust TV settings or access third-party apps, you need to use the remote control that comes with your TV. The Genie remote allows all Genie devices in RF mode to be self-programmed even without a line of sight. And they also function with other receivers in IR mode.

Here are some possible reasons for the DIRECTV remote not working correctly.

REASONS FOR REMOTE NOT WORKING

There are many reasons which are responsible for DIRECTV remote not working.

• The batteries of the remote are dead.
• Something or some object is blocking the receiver.
• A button has been left stuck in after pressing it on the remote.
• Your remote got dirty because of dust or any other substance.
• It can be possible that you are using the old remote with the new box.
• Sometimes DIRECTV remote volume is also not working because the remote cannot pass the light to the receiver.

These can be the reasons for DIRECTV remotes not working.

Now, let's look at the solutions to fix the DIRECTV remote.

HOW TO FIX THE ISSUES OF REMOTE NOT WORKING

Here, we are going to provide you with the solutions to fix the remote. Each problem can have a different solution, and sometimes for all different kinds of solutions, there can be only one solution available. So, you have to first identify the problem, and then you can go for the solution.

1. To Fix the volume of the tv, changing channels and other remote issues.

Sometimes it can be that the DIRECTV remote volume is not working. For example, if we talk about the Genie remote, it uses light to send the signal to the receiver. If anything is blocking the receiver's vision of light, then this can affect the functionality of the remote. To solve this problem, make sure that you put your receiver in such a place that nothing comes between the receiver and the remote.

2. Check the batteries

You should know that the DIRECTV Universal remotes have an inbuilt battery level indicator. You just need to press and hold button one and watch for a green light to blink on top of the remote. If the light is on and doesn't blink, it means the batteries are full. If it blinks, the batteries have power left, but they are getting weak. If the light does not blink, then you need to replace the batteries.

3. Reset The Remote And Your Receiver

For resetting the receiver, press the red button on the receiver and wait for it to restart.

To reset the remote, follow these steps.

• Press both the MUTE and SELECT buttons simultaneously.
• Wait for the green light above the switch on the remote to flash two times.
• Then press 9 8 1 digits. Now see the green light blink four times.
• Now press the LIST, GUIDE, or MENU buttons to check if the remote works or not.

Or you can also make use of the menus on the TV to reset the remote by following these steps.

• First, press the MENU button and select SETTINGS & HELP.
• Then, select the SETTINGS option and then select the REMOTE CONTROL option.
• Now you should see the RESET REMOTE option.
• Select it when highlighted, and then check for the remote to start working.

4. Clean the remote

Often, the keys tend to stop sending the right signal to the receiver because of the dust that builds up and gets stuck in the remote. Cleaning it will help you to fix the remote. Using a soft cloth, wipe the front panel of the receiver. It's the easiest solution.

5. Check for the button

The remote may stop working if one of the buttons on it has been left stuck in the pressed position. To easily solve this, first, check that the mode on the remote is connected to DIRECTV. Then, check for the stuck buttons, and mend them. Now try the remote again.

6. Try to change the mode of the remote

One of the basic steps toward fixing your remote is changing the modes of the remote. To change the mode, press the MENU button; after selecting SETTINGS and then select REMOTE CONTROL. In the available options, you should see the IR/RF SETUP. Select it and change the mode of the controller. Then press CONTINUE and EXIT and then use the remote again.

While changing the mode, you have to change to RF for the Genie remote and IR for the universal remote.

7. Replace your Remote

After all these options, the remote still doesn't work; you have to replace it. You can order it by contacting its direct helpline number, or you can purchase it from the AT&T website or any other website.

But what if the remote still doesn't work? Don't worry; we still have got one more solution that can be your last resort for solving the issues of the remote.

WHAT TO DO IF THE DIRECTV REMOTE STILL STOPS?

If you have tried all the above steps and still your remote is not working, then here are some more steps that can still help you.

• First, start by removing the battery cover, batteries, and screws.
• Next, remove the upper of the panel with the buttons of the remote.
• Clean the panel and the buttons with a cloth.
• Make sure that the buttons are properly lubricated and connected to the green board of the remote; for that, put some pencil lead powder on the back of the button, but do not spread it all over.
• Now, resemble the parts and check the remote.

You can also regularly clean the remote and check for the batteries if you want the remote to work for a long time. When your DIRECTV remote is fixed and you could use your smart TV as usual, you could try to download the movies and TV shows onto your devices and enjoy them on your TV without limitation by using StreamGaGa Video Downloader. It’s a professional and user-friendly app for you to get access to video sources in high-quality and you could keep them permanently on your devices for offline watching.

Frequently Asked Questions

1. How to reset your DIRECTV remote?

If you want to reset DIRECTV remotes to their default factory settings, press the MUTE and SELECT buttons and hold them until the remote's light blinks three times. Then, press 981 digits and press SELECT. The remote light will flash four times to let you know it has been reset.

2. Reason for DIRECTV remote quitting working?

If your remote is not responding or working, it's not changing channels or adjusting the volume; make sure that you have a direct line of sight to the receiver with the remote. Then, make sure your remote is connected to the DIRECTV receiver to control it. Then, slide the mode at the top of the remote and switch it to the left to the DIRECTV symbol.

3. How to manually program a DIRECTV remote?

First, press the MENU button on your remote. Select Settings, then Remote Control and then Program Remote. Pick the device you wish to control with the remote and select it. Follow the instructions that popup on the screen to complete programming.

4. Why do TV remotes drain?

It is a natural thing to happen that the remote will get dirty due to dust, and in the end, it will wear out, or if it is dropped many times, then also it will wear out.

FINAL WORDS:

So, now after reading this article, you are aware of the problems DIRECTV remote has. Problems like remote for DIRECTV not working, DIRECTV remote volume not working keep coming. So, first, you need to find the problem that is occurring, and then you can go for the various solutions that are given in this article. And then your remote is all set to work, and if you can't make it work, then the last option is always to go for purchasing a new remote and end all the issues regarding the remote.