How to Reset Your Chromecast?

2023-01-05 | Sam

Tip: Resolve every issue related to reset Chromecast by following the above given different methods to fix it irrespective of 1st, 2nd, 3rd, or ultra model version.

Google Chromecast is one of the most beneficial casting devices but at times because of issues such as malfunction, it's important to know how to reset Chromecast. This article would act as a guide to showcase different ways to reset Chromecast easily.

The different ways might vary to reset the numerous generations of Chromecast. The resetting of the device could be done either from the Chromecast device or the Google Home app.

Irrespective of the version of your Chromecast, you should know how to reset a Chromecast to factory specs eventually.

Check how global users use Chromecast frequently to entertain them (2019 Report)

How to reset Chromecast 1, 2, 3, and 3 ultra?

Chromecast reset would put your device back to its original condition or when it was first pulled by the user out of the box. This serves the most advantage if one is trying to troubleshoot a particular error or trying to add it to any other home in the Google Home app. Before selling it's recommended to reset Chromecast.

Despite the limited storage space on your Chromecast, it still keeps information related to your Google account until final resetting. There are three different ways to reset Chromecast.

The methods are detailed below:-

Chromecast 1st Generation:-

Follow the two mentioned methods to reset 1st gen chrome cast:-

Tip: Before proceeding further, make sure to connect to your same Wi-Fi network.

Method 1: With the help of the Google Home App

Update your Google Home app if you haven't already.
Open your Google Home app and click on the Chromecast devices.
At the topmost right corner click on the settings.
Select the three-dot icon and go to factory reset. You are done.

Method 2: Using the Chromecast itself

Switch on your TV where the Chromecast is connected.
On the rear side, keep the button on hold for a few seconds until the flash of the solid LED light starts.
After following the above two methods, the TV would become blank followed by a reboot of the Chromecast.

Chromecast 2nd generation:-

The steps to reset Chromecast 2nd gen are as follows:-

Method 1: With the help of the Google Home App

Start with updating your Google Home app.
SelectChromecastecast device and click on the settings present in the top right corner.
Tap on the factory reset and click more.
Be patient for a few seconds and the process is done.

Method 2: From Device Itself

The first step is to turn on your Chromecast that is attached to the TV.
Press the Chromecast button for some seconds. You would notice that the orange light will start blinking continuously.
As soon as the white light turns on you have to keep the button on hold.
After turning on the white light, release the button and your Chromecast will reboot.

Many users have experienced this issue that their Chrome has stopped working suddenly.

Chromecast 3rd generation and ultra:-

The method to fix chrome cast 3rd gen, as well as ultra, is the same. The steps go as follows:-

1. Plugging in the Chromecast

Irrespective of the type of version of the Chromecast, it's important to use a plugin for doing a hardware reset properly. Establishing a connection with your TV isn't needed. Each Chromecast constitutes a status indicator light that starts flashing while starting the reset procedure.

2. Locating your hardware reset button

The shape of the hardware reset button is an oval shape that is present on the side of your device, closest to the power port of the micro-USB. Follow the two simple steps to reset the button on 3rd gen Chromecast:-

With the Google TV, on your new Chromecast, the circular button is present at the dongle's bottom.
Reset the button on your Chromecast with the help of Google TV.

3. Press and keep the reset button on hold

When the Chromecast is already plugged in, press as well as hold your reset button until the status light starts flashing. The process takes around five to ten seconds on the maximum Chromecast version, the original version being an exception.

The users who have 1st gen Chromecast are required to press the button for around 20 seconds to start with the reset procedure.

4. Be patient until the flash of your status light stops

After the start of the procedure, users aren't required to proceed with any other step. After the flash of the status indicator light stops and turns solid it marks the completion of the reset.

Why fail to reset Chromecast?

Most of the time the failure behind the working of Chromecast is hardware related and users might have to replace their Chromecast device. In many cases, the Chromecast not working issue can easily be fixed by either power flushing or rebooting the Chromecast Device.

If either of the solutions doesn't help, you should go ahead with factory reset Chromecast and set up your Chromecast Device with the help of the Google Home App.

However, this issue can be fixed if you try these steps:-

1. Reboot your Chromecast manually

Since no reboot button is present on Chromecast, users are free to reboot it by disconnecting it from the source that is the power supply.

2. Pull out your Chromecast device from both Wall Outlets as well as the device

Start with disconnecting Chromecast from the power supply
Wait for 30 to 60 seconds and reconnect your Chromecast to the Wall outlet and TV.
After you have rebooted your Chromecast manually make sure to check its working condition.

3. Reboot Router

Almost any issue can be fixed if you reboot your router with your Wi-Fi-connected devices.

From the power supply source, make sure to unplug your modem or router.
Wait for a minute to plug it back into the power supply source. Check if the Chromecast is working properly.

4. Power Flush Chromecast and TV

TV as well asPower Flushing Chromecast Device is known for fixing issues and glitches which cause problems.

Switch off your TV followed by disconnecting it with the power cord from your wall outlet.
Users are instructed to disconnect their Chromecast both from the HDMI port of the TV as well as the Wall Outlet.
Wait for 20 to 30 seconds to connect your TV to the power supply and to switch it on back.
Connect your Chromecast to the wall outlet or Power Supply.
Wait for a few seconds before connecting the Chromecast to the HDMI port.
You can also use the remote of your TV for switching the display to the right HDMI 1, HDMI 2 port to which your device is connected.

How to resolve the problem of factory reset Chromecast?

The process to reset Chromecast is quite simple and easy. The process to know how to factory reset Chromecast barely takes a few minutes and you are done with restoring it to the original factory settings. This means users can easily start fresh on their device which is quite similar to a new device.

There are two common methods to know how to reset Chromecast. To begin, ensure the proper connection of your TV as well as Wi-Fi network to the Chromecast just like any other device such as a tablet, phone, or computer you use.

Factory reset Chromecast with the help of the reset button:-

This particular method is suitable for every generation model of the Chromecast. Follow the steps given below:-

You would find the micro-USB port right next to the Chromecast device is the button to reset the device.
Click and hold the minute for 30 seconds.
You would observe the red or orange light which depending on the model would automatically turn white. At that time lose hold of the reset button.
After disconnecting the Chromecast from your power cable, wait for some time before you have to reconnect the device.

Factory reset Chromecast using Google Home App:-

The method to factory reset Chromecast commonly applies to both the 2nd and 3rd gen Chromecast models. The 1st gen Chromecast model can be easily reset by following a manual process on the device.

Open your Google Home app on your iOS or Android Device.
Click on the Chromecast device which requires resetting.
Adjust the settings of your Google Home app at the top right.
Tap on three vertical dots to select more.
Select Factory Reset and you are done.

Frequently Asked Questions (FAQs):

Q1. Why does my Chromecast keep disconnecting?

A: Users can reset their Chromecast by unplugging and being patient for a few seconds before they reinsert the power cord. Resetting the router or modem by following the instructions of your device manufacturer is suggested. Make sure that your Chromecast is at a further distance from the side or back of the TV and it doesn't touch any other cable or wires.

Q2. Is it possible to update the old Chromecast?

A: To take advantage of the latest available features on your Chromecast, your device must be updated to the latest version of the software. The update is processed automatically being an essential part of the setup so there's no requirement for a system update.

Q3. Why does Chromecast use Wi-Fi or Bluetooth?

A: The Chromecast needs an internet source via a host such as an ethernet, hotspot, or router along with the caveat. After the activation of the Guest mode on your Chromecast, it would emit a Bluetooth beacon as well as special Wi-Fi. Most users launch their Chromecast-supported by switching on the guest mode.

Conclusion

It is a great benefit to use Google Chromecast but often it demands resetting. If your device has stopped functioning or frozen, you require to reset Chromecast or restorative or to the factoring settings. For that users are required to perform an FDR or factory data reset on their device.

Want to watch your videos offline without limitation, learn about the StreamGaGa Video Downloader, a one-stop shop for you to obtain movies, shows and anime videos.

////////////////////